Format manual reference rich rtf text

Right-click the rich text box for which you want to enable or disable full rich-text formatting, and then click Rich Text Box Properties on the shortcut menu. To enable full rich-text formatting for the selected rich text box, select the Full rich text images, tables, etc. To allow users to embed pictures inside the rich text box, select the Embedded images check box. To allow users to link to pictures from the rich text box, select the Linked images check box. To prevent users from inserting any kind of picture into the rich text box, clear both the Embedded images and Linked images check boxes.

To disable full rich-text formatting for the selected rich text box, clear the Full rich text images, tables, etc. Note: If you are designing a browser-compatible form template, partial rich-text formatting and embedded images are not supported. If you see an error about incompatible rich-text settings in the Design Checker task pane, select the Enable browser-compatible settings only check box in the Rich Text Box Properties dialog box.

Doing so automatically selects the correct rich-text settings for you. InfoPath InfoPath More Need more help? Expand your skills. Get new features first. The N argument identifies the metafile type the default is 1. Source of the picture is a Windows device-independent bitmap. The N argument identifies the bitmap type must equal 0.

Source of the picture is a Windows device-dependent bitmap. Number of adjacent color bits on each plane needed to define a pixel the default is 1. Possible values are 1 monochrome , 4 16 colors , 8 colors and 24 RGB. Specifies the number of bytes in each raster line. This value must be an even number because the Windows graphics device interface GDI assumes that the bit values of a bitmap form an array of integer two-byte values.

The N argument is a long integer. Desired height of the picture in twips. Horizontal scaling value. Vertical scaling value. Scales the picture to fit within the specified frame. Indicates there are shape properties applied to an inline picture. Top cropping value in twips. A positive value crops toward the center of the picture; a negative value crops away from the center, adding a space border around picture the default is 0.

Bottom cropping value in twips. Left cropping value in twips. Right cropping value in twips. Specifies the bits per pixel in a metafile bitmap.

The valid range is , with 1, 4, 8, and 24 being recognized. The picture is in binary format. The numeric parameter N is the number of bytes that follow. Unlike all other controls, this control word takes a bit parameter. N represents units per inch on a picture only certain image types need or output this.

An object type of OLE embedded object. Forces an update to the object before displaying it. The text argument is the object class to use for this object; ignore the class specified in the object data. N is the original object height in twips, assuming the object has a graphical representation. N is the original object width in twips, assuming the object has a graphical representation. N is the distance in twips from the left edge of the objects that should be aligned on a tab stop.

This is needed to place Equation Editor equations correctly in line. N is the distance in twips the objects should be moved vertically with respect to the baseline. This is needed to place Math Type equations correctly in line. This subdestination contains the alias record for the publisher object for the Macintosh Edition Manager.

This subdestination contains the section record for the publisher object for the Macintosh Edition Manager. It contains the last update of the result of the object.

The data of the result destination should be standard RTF so that RTF readers that don't understand objects or the type of object represented can use the current result in the object's place to maintain appearance. Object attachment placeholder. Used in the RTF stream when Word is started as a mail editor and the message contains attachments.

The control word tells where in the text stream the attachment should be placed. It does not define the actual attachment. The publisher object updates all Macintosh Edition Manager subscribers of this object automatically whenever it is edited.

Indicates a drawing object is to be inserted at this point in the character stream. Angle of callout's diagonal line is restricted to one of the following: 0, 30, 45, 60, or If this control word is absent, the callout has an arbitrary angle, indicated by the coordinates of its primitives. Offset of callout. This is the distance between the end of the polyline and the edge of the text box. Auto-attached callout. Polyline will attach to either the top or bottom of the text box depending on the relative quadrant.

X-coordinate of the current vertex only for lines and polylines. The coordinate order for a point must be x, y. Y-coordinate of the current vertex only for lines and polylines. This indicates that the end point of the arc is to the right of the start point. Arcs are drawn counter-clockwise. This indicates that the end point of the arc is below the start point. Length of end arrow, relative to pen width: 1 Small 2 Medium 3 Large.

Width of end arrow, relative to pen width: 1 Small 2 Medium 3 Large. Length of start arrow, relative to pen width: 1 Small 2 Medium 3 Large.

Width of start arrow, relative to pen width: 1 Small 2 Medium 3 Large. Light trellis lines. The value N is a measurement in twips. Specifies position of shape from the left of the anchor. Specifies position of shape from top of the anchor. Specifies position of shape from bottom of the anchor. Specifies position of shape from right of the anchor. A number that is unique to each shape. This keyword is primarily used for linked text boxes. Describes z-order of shape.

It starts at 0 for the back most shape and proceed to N for the top most shape. The shapes that appear inside of the header document will have a separate z-order as compared to the z-order of the shapes in the main document. For instance the back-most shape in the header will have z-order number 0, and the back-most main-document shape will also have z-order number 0. Describes the type of wrap for the shape.

Describes relative z-ordering. Text for a shape. Specifies a group shape. The order of the shapes inside a group is from bottom to top in z-order.

Specifies the document background. This is a destination keyword. Alignment on curve: 0 Stretch each line of text to fit width 1 Center text on width 2 Left justify 3 Right justify 4 Spread letters out to fit width 5 Spread words out to fit width. False if these properties are ignored. If an font is available use it; otherwise, rotate individual characters 90 degrees counter-clockwise.

Adjust the spacing between characters rather than the character advance by the gtextSpacingratio. When laying out the characters, consider the glyph bounding box rather than the nominal font character bounds.

When laying out characters, measure distances along the x-axis rather than along the path. Flags for linked to file pictures: 0 No links default 10 Link to file; save with document 14 Link to file; do not save picture with document.

First adjust value from an adjust handle. The interpretation varies with the shape type. Adjust values alter the geometry of the shape in smart ways. Type of fill: 0 A solid color 1 A pattern bitmap 2 A texture pattern with its own color map 3 A picture centered in the shape 4 Shade from start to end points 5 Shade from bounding rectangle to end point 6 Shade from shape outline to end point 7 Shade using the fillAngle.

Flags for fills: 0 No links default 10 Link to file; save with document 14 Link to file; do not save picture with document. The fillToLeft , fillToTop , fillToRight , and fillToBottom values define the "focus" rectangle for concentric shapes; they are specified as a fraction of the outer rectangle of the shade.

When a textured fill is used, the texture may be aligned to with shape fFillShape --if this is done, the default alignment is to the top left.

The values FillOriginY FillShapeOriginX fillShapeOriginY allow an arbitrary position in the texture relative to the top-left proportion of the texture's height and width to be aligned on an arbitrary position on the shape relative to the top-left proportion of the width and height of the bounding box. Note that all these values are fixed point fractions of the relevant width or height. Flags for patterned lines: 0 No links default 10 Link to file; save with document 14 Link to file; do not save picture with document.

Line style: 0 Single line of width lineWidth 1 Double lines of equal width 2 Double lines, one thick, one thin 3 Double lines, reverse order 4 Three lines, thin, thick, thin. Type of shadow: 0 Offset shadow 1 Double offset shadow 2 Rich perspective shadow cast relative to shape 3 Rich perspective shadow cast in shape space 4 Perspective shadow cast in drawing space 6 Emboss or engrave.

The shadowScaleXToX to shadowWeight define a 3x2 transform matrix that is applied to the shape to generate the shadow. Define the position of the origin relative to the center of the shape-- this position is determined based on a proportion of the rotated shape width and height.

The shape will be rotated and then positioned such that the point is at 0,0 before the transformation is applied. Degrees about y-axis. If fc3DconstrainRotation a Boolean property which defaults to True is True the rotation is restricted to x-y rotation and the final rotation results from first rotating by c3DYRotationAngle degrees about the y-axis and then by c3DXRotationAngle degrees about the z-axis. Rotation center X. The X and Y values are a The Z value must be in absolute units EMUs.

Rotation center Y. The X values and Y values are a fraction of the geometry width and height, with 0,0 being at the center of the geometry. The Z value is in absolute units. The following c3DOriginY and c3DSkewAngle values define the origin relative to which the viewpoint origin is measured. These values are When these values are applied, the actual transformed shape path is used rather than the shape geometry compare with the shadow and perspective values which necessarily work on the geometry bounding box not the actual points.

This means that a shape that extends outside the geometry bounding box such as a text effect is handled "correctly" for the calculation of the 3-D origin. Key light source direction. Values may be any number; only their relative magnitudes matter. Fill light source direction; only their relative magnitudes matter. This direction defines a second light source arbitrarily called the "fill light.

This fill will be dim compared to the first light source. Theoretically it should be non-harsh, but harsh fill lighting looks better sometimes. True if the fill has parallel projection, False if it does not. A skew amount of 0 means the projection is orthographic. Callout type: 1 Right angle 2 One segment 3 Two segments 4 Three segments. Callout angle: 1 Any angle 2 30 degrees 3 43 degrees 4 60 degrees 5 90 degrees.

True if Auto attach is on. False if it is off. If this is True , then the converter should occasionally invert the drop distance. True if the callout length is specified; False if it is not. If True , use dxyCalloutLengthSpecified. If False , the Best Fit option is on. Friendly name for hyperlink. The purpose of creating the rtf file is to make the cross-platform document interchanging as reality.

The majority of word process programs that are applied at present can read this format without any issues. Since, it is a cross-platform document, it allows you to open am rtf file on other operating systems besides the one that you build the file. For instance, you build a rtf file on Windows OS, but you can open this file on a MacOS, or Linux device after you sends it to the device.

It is also widely used in many other kinds of applications like email clients. What makes the rtf format different from other text formats? MiniTool will show you in the following content. You can only store the plain text with a normal text file, while you are allowed to store different formatting such as italics, bold, fonts, sizes, and images with a rtf file.

This feature makes rtf unique over other text formats. The rtf even becomes the default format for Microsoft WordPad. In addition, rtf files were used as the basis of Windows help files before they were replaced by HTML files.

However, Microsoft stopped updating rtf since Even so, this text format is still supported by applications on almost every operating system. So, you can continue running your rtf files on older or other platforms.